CXL 2-1/h Marine antenna

MODELL / Type

CXL 2-1/h

This base station and maritime antenna is developed for use on board ships as well as on masts and beacause of the 1“ revolving nut mounting system it can be mounted on the mast, in the auxilliary mast as well as on the cross beam. By means of PROCOMS flange mount it can also be mounted on deck or rooftop; bear in mind that the higher the antenna is mounted the better the coverage; avoid mounting the antenna parallel with and next to other metal parts, such as masts, supporting wires etc.; free mounting and as high as possible is most preferable, otherwise the SWR and the radiation diagram will be influenced; the antenna is a ½ λ design and this means that it neither loading coils, ground plane, radials nor other arrangements; the antenna can, without problems, operate with duplex radios and on the semiduplex channels, owing to the fact that it is broad banded; furthermore, the antenna is a grounded radiator antenna and therefore it shows a DC short across the coaxial cable; a conical glass fibre tube completely encloses the carefully designed radiating element to assure long dependable service in all climates

Antennenyp /
Antenna type

Koaxial-Dipol, breitbandig /
Coaxial dipole, broad banded

Frequenzbereich /
Frequency range

155 - 175 MHz

Impedanz /
Impedance

Nom. 50 Ohm

Strahlung /
Radiation

Rundstrahlend /
Omnidirectional

Polarisation /
Polarization

Vertikal /
Vertical

Gewinn /
Gain

0 dBd (2.2 dBi)

Bandbreite /
Bandwidth

20 MHz

SWR

≤ 1.5 @ 146 - 163 MHz
≤ 1.75 @ 146 - 165 MHz:

Max. Leistung /
Max. power

150 W

Antistatikschutz /
Antistatic protection

Alle Metallteile DC-geerdet (Stecker zeigt DC-Kurzschluss an) /
All metal parts DC grounded (connector shows a DC short)

Temperaturbereich /
Temperature range

-30 °C / +70 °C

Windfläche /
Wind surface

0.018 m²

Windlast /
Wind load

25 N @ 160 km/h

Material /
Materials

Schutzrohr: polyurethanbeschichtetes Glasfiber
Montagehalterung: Messing, verchromt /
Shroud: polyurethane coated glass fibre
Mounting bracket: chromed brass

Anschluss /
Connector type

UHF-Buchse /
UHF female

Farbe /
Colour

Marineweiß /
Marine white

Durchmesser Ant.-Kopf /
Dia. in top end

8 mm

Durchmesser Ant.-Fuß /
Dia. in bottom end

16 mm

Gesamtlänge /
Total length

approx. 1.21 m

Gewicht /
Weight

approx. 300 g

Montage /
Mounting

Auf 1“ (G1“-11) Wasserrohrgewinde oder auf optionalen Montagehalterungen /
On 1“ RG (G1“-11) threaded water pipe or on optional mounting brackets

Art-Nr. / Part No.:

P110000123