CXL 2-3 Marine antenna

MODELL / Type

CXL 2-3

Kollineare 3 dBd Antenne von PROCOM für Feststation oder Marine-Anwendung für 156 - 162 MHz; DC-geerdet; PL-Buchse; Schutzrohr aus Glasfaser /

3 dBd collinear antenna for the base station and maritime VHF band (156 - 162 MHz); this antenna is used when more gain is required than obtainable with standard ½ λ-dipoles; the 1“ revolving nut mounting system is standard throughout the maritime sector and several different mounting brackets are available, making it it possible to install the antenna either on the masthead, side mounted on the mast or mounted on the cross beam; also, the antenna can be mounted on deck or rooftop by means of the FLG; the higher the antenna is mounted, the better the coverage; avoid mounting the antenna parallel or in the neighbourhood of other metal parts, such as masts, supoorting wires etc.; the antenna needs no groundplane, radials nor other auxiliary arrangements; CXL 2-3 is broad banded, having a good SWR on the RX frequencies as well as on the TX-frequencies; all metal parts are at ground potential and consequently the antenna shows a DC short across the coaxial cable; a conical glass fibre tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates

Antennentyp /
Antenna type

Kollinear, rundstrahlend /
Collinear, omnidirectional

Frequenzbereich /
Frequency range

156 - 162 MHz

Impedanz /
Impedance

Nom. 50 Ohm

Polarisation /
Polarization

Vertikal /
Vertical

Gewinn /
Gain

3 dBd (5,2 dBi)

Öffnungswinkel /
Beamwidth

30°

Bandbreite /
Bandwidth

6 MHz

SWR

< 1,5

Max. Leistung /
Max. power

150 W

Antistatikschutz /
Antistatic protection

Alle Metallteile DC-geerdet (Stecker zeig einen DC-Kurzschluss) /
All metal parts DC-grounded (connector shows a DC-short)

Temperaturbereich /
Temperature range

-30 °C / +70 °C

Anschluss /
Connector type

UHF-Buchse /
UHF female

Windfläche /
Wind surface

0,063 m²

Windlast /
Wind load

89 N @ 160 km/h

Farbe /
Colour

Weiß (RAL 9003) /
White (RAL 9003)

Material /
Materials

Schutzrohr: polyurethanbeschichtetes Glasfiber
Montagehalterung: Messing, verchromt /
Shroud: polyurethane coated glass fibre
Mounting bracket: chromed brass

Durchmesser Ant.-Kopf /
Dia. in top end

15 mm

Durchmesser Ant.-Fuß /
Dia. in bottom end

23 mm

Gesamtlänge /
Total length

ca. 2750 mm in 1 Stück!
approx 2.75 m in one section

Gewicht /
Weight

ca. 1 kg

Montage /
Mounting

Auf 1“ RG (G1“-11) Wasserrohrgewinde oder auf optionalen Montagehalterungen /
On 1“ RG (G1“-11) threaded warer pipe or on optional mounting brackets

Art-Nr. / Part No.:

P110000130