MODELL / Type
|
BCL 1-KA
|
PROCOM Breitbandige Aktiv-Empfangsantenne; bestehend aus einem hochkapazitivem Antennenstrahler, kombiniert mit einem im Antennenfuß eingebautem Verstärker; Der Verstärker passt die Impedanz zwischen dem hochohmigen Antennenstab und dem 50 Ω Antennenkabel über eine sehr hohe Bandbreite an; Der Verstärker wird mit Hilfe einer Fernspeisebox durch das 50 Ω Koaxkabel mit DC-Spannung versorgt, die in unmittelbarer Nähe des Empfängers montiert werden kann. Die Fernspeisebox trennt die DC-Spannung und HF-Signale und kann z. B. an die 12 V Spannungsversorgung des Receivers angeschlossen werden; Durch die optimierte Anpassung des Verstärkers ist das Eigenrauschen von Antenne und Empfänger generell kleiner als das empfangene Rauschen der Antenne. Der Verstärker ist gegen Großsignale sowie atmosphärische Entladungen geschützt. Der große Dynamikbereich sichert ausgezeichnete Kreuz- und Intermodulationseigenschaften; Das Erdungskabel (siehe Zeichnung) dient einer verlustarmen Masseverbindung für HF-Signale und schützt vor Störungen, die z. B. bei Schiffsinstallationen außen am Koaxialkabel entstehen. Das Erdungskabel ist zum Schutz vor elektrolytischer Korrosion AC-gekoppelt; Die Fernspeisebox ist verpolungsgeschützt und gegen Aufnahme von Interferenzen gefiltert; Die Fernspeisebox ist mit FME-Anschlüssen für die Antenne und den Empfänger versehen. Ein 1-m-FME-Kabel sowie ein FME-UHF Adapter zum Anschluss der Box an den Empfänger und ein FME-Crimpstecker für das herabzuführende Antennenkabel (RG 58) sind im Lieferumfang enthalten; Die Antennenkonstruktion widersteht rauesten Wetter- und Klimabedingungen und ist speziell für maritime Anwendungen geeignet; Die BCL 1-KA wird mit dem „SM-MA“ Masthalter geliefert. /
Broadband active receiving antenna for 10 KHz - 110 MHz; This active receiving antenna consists of a high capacitance antenna element combined with an amplifier which is built into the antenna mount; The amplifier provides excellent impedance matching between the high impedance antenna element and the 50 Ω downlead cable over an extremely wide bandwidth; The sensitivity of the amplifier is optimized so that noise generated in the antenna and the receiver is always less than noise picked up by the antenna. The amplifier is protected against RF-overload and violent discharges and the large dynamic range ensures excellent cross and intermodulation properties; The earthing wire (see drawing) ensures a low loss connection to ground for RF signals and thereby also prevents noise pick up from noise fields running on the outside of the coaxial cable. As the earthing wire is AC coupled, electrolytic corrosion is effectively prevented; The antenna is supplied with DC power through the downlead 50 Ω coaxial cable by means of the included junction box which can be mounted in close vicinity to the receiving station. The junction box separates DC- and RF-signals and can advantageously be fed from the same DC power supply as the receiver (if 12 V); The junction box is protected against accidental polarity reversal and it is filtered to avoid interference pick up; The junction box is provided with FME connectors for the antenna and the receiver ports. 1 m FME cable and an FME-UHF connector is included for connecting the box to the receiver as well as an FME crimp connector for the downlead cable (RG 58); The BCL 1-KA is designed to withstand the roughest of weather and climate conditions and it is perfectly suited also for marine purposes; The BCL 1-KA is supplied with „SM-MA“ mast mounting bracket
|
Antennentyp /
Antenna type
|
Breitbandige Aktiv-Empfangsantenne /
Broadbanded active receiving antenna
|
Frequenzbereich /
Frequency range
|
10 kHz – 110 MHz
|
Impedanz /
Impedance
|
Nom. 50 Ohm
|
Polarisation /
Polarization
|
Vertikal /
Vertical
|
VSWR
|
< 2,0
|
3 dB Bandbreite, horizontale Ebende /
3 dB bandwidth, horizontal plane
|
Omnidirektional /
Omnidirectional
|
Antennenfaktor /
Antenna factor
|
Typ. 0,25 mV Ausgang in + 50 Ω bei einer Feldstärke von 1 mV / m /
Typ. 0.25 mV output in + 50 Ω by a field strength of 1 mV / m
|
1 dB Kompressionspunkt /
1 dB compression point
|
Tritt typischerweise bei einer Feldstärke von 1,5 V / m auf /
Typ. occurring at a field strength of 1.5 V / m
|
1 dB Leistung /
1 dB power
|
Typischerweise bilden sich bei einer Feldstärke von 1 V / m Störsignale /
Typ. occurring at a field strength of 1 V / m from an interfering signal
|
Krossmodulation /
Cross modulation
|
40 dB Kreuzmodulationsdämpfung, die typischerweise bei einer Feldstärke von 0,7 V / m von einer Störquelle auftritt /
40 dB cross modulation attenuation typically occurring at a field strength of 0.7 V / m from an interfering source
|
Max. Intensität des erhaltenen Feldes /
Max. intensity of received field
|
Verzerrungen aufgrund der Begrenzung der Verstärkerspannung treten bei Feldstärken auf, die 1,5 V / m überschreiten /
Disortion due to amplifier voltage limitation occurs at field intensities exceeding 1.5 V / m
|
OIP2
|
OIP2 > 40 dBm
OIP3 > 27 dBm
|
Atmosphärischer Schutz /
Aerial protec
|
Funkstrecke /
Spark gap
|
Stromversorgung /
Power supply
|
12 V DC (9-14 V)
|
Stromverbrauch /
Power consumption
|
ca. 60 mA
|
Temperaturbereich /
Temperature range
|
-30 °C / +60 °C
|
Windfläche /
Wind surface
|
0.0259 m²
|
Windlast /
Wind load
|
28.8 N @ 160 km/h
|
Material /
Materials
|
Hülle: Glasfiber und Messing, verchromt
MA Gehäuse: Lexan und Messing verchromt /
Shroud: glass fibre and chromed brass
MA housing: lexan and chromed brass
|
Kabel /
Cable
|
1 m FME-Kabel und FME-UHF Adapter /
1 m FME cable and FME-UHF adaptor
|
Anschluss /
Connector type
|
UHF-Buchse (PL-259) /
UHF female
|
Farbe /
Colour
|
Marineweiß /
marine white
|
Gesamtlänge /
Total length
|
920 mm
|
Durchmesser Antennenkopf /
Dia. in top end
|
7 mm
|
Durchmesser Antennenfuß /
Dia. in bottom end
|
10 mm
|
Gewicht /
Weight
|
ca. 600 g
|
Montage /
Mounting
|
An Masten mit 30 mm - 44 mm Durchmesser oder auf flachen Flächen /
On 30 mm - 44 mm diameter mast tube or on flat surfaces
|
Lieferumfang /
Scope of delivery
|
Antennenstrahler, 1 m FME-Kabel und FME-UHF Adapter, „SM-MA“ Masthalter /
Antenna whip, 1 m FME cable and FME-UHF adaptor, „SM-MA“ mast mounting bracket
|
Art-Nr. / Part No.:
|
P110000108
|